CNC Router: Difference between revisions
NitramLegov (talk | contribs) m (Tutor Property...how did we miss that?) |
(outsourced machine specifics to "WorkBee" and "Kress CNC", which will also be defined as CNC Mill from now on (see #267)) |
||
(20 intermediate revisions by 5 users not shown) | |||
Line 2: | Line 2: | ||
A CNC router is a computerized [[woodworking]] machine - basically a [[router]] mounted on a positioning system. While it may also be able to handle other materials than wood depending on the [[bits]] you use, a proper [[CNC Mill|CNC mill]] is more precise for machining parts out of metals and other non-wood materials. | A CNC router is a computerized [[woodworking]] machine - basically a [[router]] mounted on a positioning system. While it may also be able to handle other materials than wood depending on the [[bits]] you use, a proper [[CNC Mill|CNC mill]] is more precise for machining parts out of metals and other non-wood materials. | ||
To use this machine, you need to familiarize yourself with at least two pieces of software: | To use this type of machine, you need to familiarize yourself with at least two pieces of software: | ||
* a [[CAD]]/[[CAM]] program (e.g. [[Fusion 360]]) | * a [[CAD]]/[[CAM]] program (e.g. [[Fusion 360]]) | ||
** may also be two different programs, one for CAD and one for CAM | ** may also be two different programs, one for CAD and one for CAM | ||
Line 12: | Line 12: | ||
You can [https://www.opendesk.cc/ make furniture] or even [https://wikihouse.cc/ build a house]. For more ideas, check out the [[CNC Milling Ideas]]. | You can [https://www.opendesk.cc/ make furniture] or even [https://wikihouse.cc/ build a house]. For more ideas, check out the [[CNC Milling Ideas]]. | ||
{{MachineInclusion}} | |||
{{ | |||
}} | |||
==Tips & Tricks == | |||
*to avoid tear-out at the edge of a sensitive workpiece, it may be worthwhile to surround it with some sacrificial material (like [[MDF]]) before routing <sup>[https://www.instagram.com/p/BW7hYEjFxP0/]</sup> | |||
==Materials== | |||
== Materials == | |||
(''For more details, see "[[Milling Experiences]]")'' | (''For more details, see "[[Milling Experiences]]")'' | ||
Line 99: | Line 24: | ||
Cutting certain metals, e.g. millable aluminum, may still be possible with a lot of extra work, but a rigid and liquid-cooled [[CNC Mill|CNC mill]] would be the proper way to go. | Cutting certain metals, e.g. millable aluminum, may still be possible with a lot of extra work, but a rigid and liquid-cooled [[CNC Mill|CNC mill]] would be the proper way to go. | ||
=== Carbon Fiber === | === Carbon Fiber=== | ||
[[Material:Carbon Fiber|Carbon fiber]] (CF) dust can be harmful if handled improperly. If you intent to route CF parts on the CNC (like plates for quardrocopter parts) please follow the workflow below: | [[Material:Carbon Fiber|Carbon fiber]] (CF) dust can be harmful if handled improperly. If you intent to route CF parts on the CNC (like plates for quardrocopter parts) please follow the workflow below: | ||
* Route carbon fiber only in a submerge water path e.g. in a large enough tray (keep enough towels near in case of an 'accident') | *Route carbon fiber only in a submerge water path e.g. in a large enough tray (keep enough towels near in case of an 'accident') | ||
** Afterwards filter the water through a coffee filter or similar | **Afterwards filter the water through a coffee filter or similar | ||
* Don't vacuum the dust - instead, wipe it away with a moist towel or use some tape to pick it up | *Don't vacuum the dust - instead, wipe it away with a moist towel or use some tape to pick it up | ||
* Only wet sanding | *Only wet sanding | ||
* Keep the parts that came into contact with the carbon fiber dust in a sealed plastic bag until they are discarded | *Keep the parts that came into contact with the carbon fiber dust in a sealed plastic bag until they are discarded | ||
* Discard the remains at a local special waste disposal and don't put them in the garbage! | *Discard the remains at a local special waste disposal and don't put them in the garbage! | ||
* our | ==Helpful Links== | ||
*video tutorials: | |||
**[https://www.youtube.com/channel/UCXagoO_ru-R7ZrK_KgMQm-w/# Ooznest YouTube channel] (pretty new, but specific to our "WorkBee" setup) | |||
**[https://www.youtube.com/watch?v=iqnvzxuXFTQ Fusion 360 CAM Tutorial for Beginners] by Evan & Katelyn (insert our preferred [[G-Code Senders|G-code sender]] where they use Easel) | |||
*other spaces with (somewhat) similar machines and good approaches/documentation: | |||
**[https://wiki.attraktor.org/CNC-Fr%C3%A4se-III Attraktor e.V.] | |||
*our page on choosing the proper [[feedrate]] | |||
[[Category:CNC Routing]] | [[Category:CNC Routing]] | ||
[[Category:Woodworking]] | [[Category:Woodworking]] |
Latest revision as of 13:54, 6 September 2022
A CNC router is a computerized woodworking machine - basically a router mounted on a positioning system. While it may also be able to handle other materials than wood depending on the bits you use, a proper CNC mill is more precise for machining parts out of metals and other non-wood materials.
To use this type of machine, you need to familiarize yourself with at least two pieces of software:
- a CAD/CAM program (e.g. Fusion 360)
- may also be two different programs, one for CAD and one for CAM
- a G-Code sender
There is also an interesting new approach of handheld CNC routing coming out which may remove the size constraints that come with any fixed-frame machine.
Uses
You can make furniture or even build a house. For more ideas, check out the CNC Milling Ideas.
WorkBee
MachineInfoBox Ooznest WorkBee CNC | |
---|---|
Synonyms: | DE: CNC-Fräse, CNC-Plattenfräse, Portalfräsmaschine |
Type: | CNC Router |
Material: | wood |
Used with: | 6 mm, 8 mm, 1/4" or 1/8" end mills; some kinds of router bits |
Location: | CNC area |
Access Requirements: | CNC Router Introduction |
Status: | [[Has InfoBox Status::broken]] |
Firmware: | grbl |
Software: | LaserWeb, Fusion360, see G-Code Sender |
Manual: | product page, click "documentation" tab |
Tutors: | NitramLegov Pakue Johannes Luzian |
Similar (More or Less): | router, CNC mill |
Currently defective due to a buggy/broken controller board! See Issue #307
We built the 1500mm x 1500mm version of the WorkBee CNC router, which is based on the Openbuilds OX. It can currently cut sheet material of up to 50 mm thickness on a work area of approximately 1250 × 1250 mm. The surfaced (plangefräste) spoilboard area is 1260 × 1160 (x × y) mm.
Our plans for further improving it up can be found in our "WorkBee CNC" github project - maybe you would like to help?
Fusion Setup
Please make sure you add the machine setup to Fusion 360.
Router
The router mounted to it is a Dewalt D26200 (GB; known outside Europe as DWP611). You need to consider the sizes of its collets (Spannzangen) when buying your router bits.
- no-load speed: 16000 - 27000 rpm
- max cutter diameter: 30 mm
- available collet diameters:
- 8 mm
- 6 mm
- 1/4 inch (6.35 mm)
- 1/8 inch (3.175 mm)
The collets of the DW613, DW620 and DW621 also fit the router and are easier to get in Germany than the original ones.
Spoilboard
Ooznest recommends a 6mm spoiler board, our first one is 20mm thick. It is mounted to the frame using 4 drop-in T-slot nuts. Cutting into the boards will make it uneven, from time to time it is neccessary to surface the spoiler board again.
The total size of the spoilboard is currently 1445 × 1370 mm.
When there is time, we would like to drill workholding holes into the spoilboard.
Electrics
(partially outdated - no dedicated CNC room since 2020!)
The spindle and the CNC controller (CNC xPro v3) + motors are hooked up to an electrical box on the left wall. You'll find a switch and an outlet for the spindle there. In case of an emergency the whole box can be shut off via one of the two emergency stops (inside the CNC room and on the outside above the access control). Everything except the Raspberry Pi will be turned off in that case.
The wiring of the CNC Controller board is as follows:
The wiring of the electrical box is as follows:
Dust Extraction
We have added a cyclone dust separator between the shop vac and the CNC router itself. Thereby, the bulk of the shavings and dust should be collected in an easily emptied box rather than the shop vac's bag.
The part that attaches the dust extraction hose to the router is called a "dust shoe". We are currently using this one designed by Patrick. The next version should ideally fit the dust extraction hose without an adapter and include a kind of transparent, flexible "skirt" to optimize the airflow.
Other interesting designs:
Workflow
This is just an overview and does NOT replace the personal introduction!
- create the tool paths in a suitable CAM software (e.g. Fusion 360)
- secure your workpiece on the machine's bed
- insert the appropriate collet & bit as defined in your tool paths
- turn the positioning motors on, home the machine and define the workpiece origin
- put on personal protection and turn the spindle on
- send the tool paths to the router in real time via the serial interface (USB)
- options can be found under "G-Code Senders"
EleksMill
MachineInfoBox EleksMill | |
---|---|
![]() | |
Synonyms: | DE: CNC-Fräse |
Type: | CNC Router |
Material: | just foam for now |
Used with: | 1/8" endmills |
Location: | 3D Printing Area |
Access Requirements: | CNC Router Introduction |
Status: | working out initial problems |
Software: | CAD/CAM software (e.g. Fusion 360); G-code sender |
Tutors: | NitramLegov Pakue Johannes Luzian |
Similar (More or Less): | CNC router |
Mitja brought his "EleksMill" CNC router into our Space - it's small, but great for learning the basics of CNC Routing/routing as it shares the same workflow as the large WorkBee.
Important Facts
- 130 × 90 × 40 mm working range (less Z freedom depending on the length of your endmill!)
- there are no endstops
- manually home the mill before a job
- you should use the (X/Y center, Z surface) as your origin
- make sure the size of your part does not exceed the working range!
- motor speed: ???
- compatible shaft diameter: 1/8" (3.175 mm)
- controlled like the CNC router (Fusion 360 or similar CAD/CAM software; G-code sender)
- connection via USB - bring your own laptop!
Workholding
The mill has a 150 × 98 mm bed containing of 4 T-slots. clamping claws or similar workholders can be attached to it using M5 screws.
The current solution is not ideal, but many the workholding options for our larger CNC router should also be suitable if scaled down.
TO DO
- figure out motor speed to calculate proper feedrates
- what else?
Past Issues
- screws/nuts used to come loose due to vibrations
- fixed with loctite or counternuts (where possible)
- Z axis used to be too hard to turn => mill drifted deeper and deeper into the workpiece as upwards movements failed but downward movements were still possible
- was caused by a faulty spring
Tips & Tricks
- to avoid tear-out at the edge of a sensitive workpiece, it may be worthwhile to surround it with some sacrificial material (like MDF) before routing [1]
Materials
(For more details, see "Milling Experiences")
CNC routing is most appropriate for non-metal panels/boards. The exact material might dictate your choice of endmill or router bit!
Cutting certain metals, e.g. millable aluminum, may still be possible with a lot of extra work, but a rigid and liquid-cooled CNC mill would be the proper way to go.
Carbon Fiber
Carbon fiber (CF) dust can be harmful if handled improperly. If you intent to route CF parts on the CNC (like plates for quardrocopter parts) please follow the workflow below:
- Route carbon fiber only in a submerge water path e.g. in a large enough tray (keep enough towels near in case of an 'accident')
- Afterwards filter the water through a coffee filter or similar
- Don't vacuum the dust - instead, wipe it away with a moist towel or use some tape to pick it up
- Only wet sanding
- Keep the parts that came into contact with the carbon fiber dust in a sealed plastic bag until they are discarded
- Discard the remains at a local special waste disposal and don't put them in the garbage!
Helpful Links
- video tutorials:
- Ooznest YouTube channel (pretty new, but specific to our "WorkBee" setup)
- Fusion 360 CAM Tutorial for Beginners by Evan & Katelyn (insert our preferred G-code sender where they use Easel)
- other spaces with (somewhat) similar machines and good approaches/documentation:
- our page on choosing the proper feedrate